Epson G7200W Users Guide - Page 46
Connecting to an HDBaseT Transmitter, Audio, Computer, Parent topic, HDBaseT
View all Epson G7200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
2. Connect the other end of the cable to the projector's Audio port that corresponds to the Computer or BNC port you are using for video. Parent topic: Connecting to Video Sources Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length. To ensure proper data transmission, use a Category 5e STP cable or better. 1. Turn off the projector and HDBaseT transmitter. Note: Make sure the projector and HDBaseT transmitter are turned off when connecting or disconnecting a network cable between the two devices. 2. Connect one end of the network cable to the HDBaseT port on the transmitter. 3. Connect the other end to the projector's HDBaseT port. Note: See the documentation that came with the HDBaseT transmitter for instructions on connecting it to your video device or computer. 46