Epson G7400UNL Quick Reference - Page 2

Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the On button. After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the On button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User's Guide. 4. If your image does not appear, see "Switching Between Image Sources" or "Troubleshooting." Changing the Language of the Projector Menus The default language of the projector's menu system is English, but you can change it as necessary. 1. Press the Menu button to acess the projector's menu system. 2. Select Extended > Language. 3. Select your language. 4. When you're done, press Menu to exit. Switching Between Image Sources Press the Search button or one of the source buttons (remote control), or the Source Search button (projector). Selecting the Lens Type Make sure the Lens Type setting is correct for the lens you are using. 1. Press the Menu button. 2. Select Extended > Operation > Advanced > Lens Type. 3. Select the lens you are using. 4. When you're done, press Menu to exit. Changing Screen Type Set the Screen Type setting to the screen's aspect ratio. 1. Press the Menu button. 2. Select Extended > Display > Screen > Screen Type. 3. Select the screen's aspect ratio. Note: The displayed image should match the screen's size and shape. 4. When you're done, press Menu to exit. Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.