Epson G7500UNL Users Guide - Page 188

Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source. Setting Projector Info Lamp Info Options Source Input Signal Resolution Refresh Rate Sync Info Status Serial Number Lens Type Event ID HDBaseT Signal Quality Lamp Hours Description Displays the name of the port to which the current input source is connected Displays the input signal setting of the current input source Displays the resolution of the current input source Displays the refresh rate of the current input source Displays information that may be needed by a service technician Displays information about projector problems that may be needed by a service technician Displays the projector's serial number Displays the lens model number Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes Displays the image signal information from the HDBaseT port Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon 188