Epson Home Cinema 1060 Users Guide - Page 149
Cleaning the Air Filter and Vents, Replacing the Air Filter, Projector Light Status
![]() |
View all Epson Home Cinema 1060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Related references Projector Light Status Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. 1. Turn off the projector and unplug the power cord. 2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). 3. If dust is difficult to remove or the air filter is damaged, replace the air filter. Parent topic: Air Filter and Vent Maintenance Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table. 1. Turn off the projector and unplug the power cord. 2. Carefully open the air filter cover. 149
![](/manual_guide/products/epson-home-cinema-660-users-guide-5ff80ef/149.png)