Epson Home Cinema 3200 Users Guide - Page 124

Status light Power light Blue Blue Lamp light Temp light Off Flashing orange Flashing blue Off Off Orange Flashing blue Off Orange Off Blue Blue Flashing Off orange Status and solution Projector is too hot • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • Make sure the environmental temperature is not too hot Projector has overheated and turned off; leave it turned off to cool down for about five minutes, then do the following: • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects • Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help Lamp has a problem • Check the Lamp Hours in the Info menu to see if the lamp is burned out. Unplug the projector, wait for the lamp to cool down, and check if it is broken or installed incorrectly; reseat or replace the lamp as necessary • Make sure the lamp cover is closed • If the problem persists, unplug the projector and contact Epson for help Replace the lamp soon to avoid damage; do not continue using the projector 124