Epson Home Cinema LS100 Quick Setup and Warranty - Page 2
Adjust the image, Using the remote control
View all Epson Home Cinema LS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Press the power button on the projector or remote control. The projector beeps, and the Status light flashes blue and then stays on. Note: To shut down the projector, press the power button twice. 4 Use the arrow buttons on the remote control to highlight any options on the Home screen that appears, then press to select it. You can switch between projection sources and quickly access various adjustment options from this screen. 5 If your image is uneven on the sides, you can use the keystone correction feature to adjust the image. To use this feature, press the or button to display the keystone correction screen. Then press the W or T button to correct for horizontal keystone distortion and the or button to correct for vertical keystone distortion. See the online User's Guide for details. 5 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the tips in "Troubleshooting" on the back of this sheet. 2 To adjust the image height, rotate the front or rear feet to raise or lower them. Using the remote control Install the batteries as shown (two AA batteries). Turn projector on and off Choose which source to display Access projector menus Navigate projector menus 3 To reduce or enlarge the image, press the T (reduce) or W (enlarge) button on the projector. Turn off projector display Access the Home screen 4 If you need to focus the image, first slide the switch on the side of the projector to open the air filter cover. Then raise or lower the focus lever to sharpen the image. For more information on using the remote control, see the online User's Guide.