Epson J9100 User Manual - Page 17

Cleaning the MICR Unit English Dirt on the MICR unit may cause frequent magnetic character reading errors. Use a cleaning sheet to clean the MICR unit regularly, at least every six months. Use the following cleaning sheet, or an equivalent commercialy available cleaning sheet. PRESAT Brand (KIC) "CHECK READER CLEANING CARD" Note: Do not use sticky cleaning sheets. They may cause a paper jam or machine failure. Be sure to dispose of used cleaning sheets. Follow these steps to clean the MICR unit. 1. Turn off the printer. 2. Open the roll paper cover, and turn on the printer while pressing the CLEANING button. 3. Press the CLEANING button once, and close the roll paper cover. 4. Insert a cleaning sheet. With the ASF model printers, insert a cleaning sheet while pulling the lever on the back of the printer. With the ASF model With the non-ASF model: Insert the check in the same way as described in "Inserting Checks" (on page 14). Scanning ID Card Image Data Notes on ID Card Reading ❏ Make sure that the ID card is flat and does not have excessive bending, cracks, folds, or embossing. ❏ Do not touch the external terminal when using an IC card. ❏ Do not insert anything other than cards. ❏ Do not open any covers while an operation is in progress. In the following situations, appropriate quality of the image data is not guaranteed. ❏ When the image scanner section is exposed to sunlight, spotlights, fluorescent lights, or other excessive lights. ❏ When the glass of the scanner is damaged by sand or other foreign materials. TM-J9000/J9100 15