Epson L-1000 Product Information Guide - Page 2
L-1000/LQ-500, DOT-MATRIX, PRINTER, Environment - lq printer
View all Epson L-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
L-1000/LQ-500 DOT-MATRIX PRINTER 1 Environment Temperature: Humidity: Shock: Vibration: Printable area: Smgle sheet Co"tlnuous paper Paper feed speed: Paper thickness: Number of copies: Approx. 100 msiline at l/&inch lrne spacing with intermIttent feeding; 2.2 inches/s wth continuous feeding. Single sheets 0.065 to 0.1 mm 10.0025 to 0.004 mchesl Co"tl"uous 0.065 to 0.25 mm (O.W25 to 0.01 Inches) With contmuous multi-part paper only. one onginal plus up to two copies. MaxImum thickness: 0.25 mm (0.01 inches) The tigure below shows the tlrmng tar the parailei lnteriace Ribbon: Cartridge ribbon. available in black only (#7753). Do not use ribbons for 9-pin printers. Life expectancy (in Letter Quality characters. at 48 dots/character): 2 million MCBF: For all components excluding print head: 3 million lines MTBF: 4000 power on hours Print head life: 200 mdlion strokes per wre Dimensions and weight: Height: 5.5 inches 1139 mm) Width : 15.3 inches 1390 mm1 Depth : 12.6 Inches (320 mm! Weight: 15 lbs. (7 kg, Electrical Voltage: 120 VAC 2 10% Power consumption: 120 Watts maximum Frequency: 49.5 to 50.5 Hz (50 Hz verslon~ 59.5 to 00.5 Hz (60 Hz vewonl Insulation resistance: 10 MR between AC power line and chaws Dielectric strength lbetrveen AC line and chawsr. l 120 V model can wtthstand 1.25 ki rms applied for one mmute l 720,240 V model can wthstand 3.75 kV rms applied tar one mmute Printing enabled/disabled signals and control conditions The table below shows the relatlonshlp between prmtmg bema enabled or disabled. the on line/off lme status. and the receipt ot the data on/&f control characters. DC1 or DC3. 'ON LINE SLCT IN DCl/DC3 (Indlcalor (Data 0") O"lOli control) ~ ERROR i BUSY I ACKNLG Printing (D~sabledi enaBledI an line ILOW ~DCl/DCJ I High i (Interface) ("0 elk!) 1 ~HlghlLow I Pulsed Enabled ;.?a c h a r En&;' ~on tine ~High on line High DC1 Recvd lDC3 ,Recvd lH@ I IHIgh / High/Low I Pulsed Enabled jea char HtghlLaw ~Pulsed Disabled' 1% c h a r 'Whlie pr~ntmg 1s disabled. character data 1s bemg received and acknowledged so that the printer can look for another DC1 character. whxh would allow It t o r e s u m e prmtmg L-1000-2 12/12/88 24 - Pin Printers