Epson L1100U Users Guide - Page 41
Connecting to an SDI Video Source, Input Signal Settings - Signal Menu
View all Epson L1100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to a Computer port on the projector. 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Connecting to an SDI Video Source If your video source has an SDI port, you can connect it to the projector using an optional BNC video cable (Pro L1405U/L1500U/L1505U). 1. Connect the BNC video cable to your video source's SDI output port. 2. Connect the other end to the projector's SDI port. 41