Epson LQ 1050 User Manual - Page 149
Attach the plug end of the FG wire onto the FG pin located on, top of the interface board.
View all Epson LQ 1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Interface Boards 3. Fit the interface board under the built-in tractor as shown in the illustration. Next, carefully insert the pins on the optional interface board into the mating connector on the main board. Secure the board with the screws provided. 4. Attach the plug end of the FG wire onto the FG pin located on top of the interface board. 5. Reassemble the printer, taking care not to pinch the FG wire between the upper and lower sections of the case. 7-31
Interface Boards
3.
Fit the interface board under the built-in tractor as shown in the
illustration. Next, carefully insert the pins on the optional
interface board into the mating connector on the main board.
Secure the board with the screws provided.
4.
Attach the plug end of the FG wire onto the FG pin located on
top of the interface board.
5.
Reassemble the printer, taking care not to pinch the FG wire
between the upper and lower sections of the case.
7-31