Epson LQ-2090IIN Network Guide - Page 11
Server / Client Connection Settings, Preparing Connection to a Network
View all Epson LQ-2090IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Network Guide Preparation Server / Client Connection Settings Connection method: Connect the printer to the network via hub (L2 switch). You can also connect the printer to the server directly by USB cable. Printer driver: Install the printer driver on the Windows server depending on the OS of the client computers. By accessing the Windows server and linking the printer, the printer driver is installed on the client computer and can be used. Features: ❏ Manage the printer and the printer driver in batch. ❏ Depending on the server spec, it may take time to start the print job because all print jobs go through the print server. ❏ You cannot print when the Windows server is turned off. Related Information & "Definitions of Terms Used in this Guide" on page 8 Peer to Peer Connection Settings Connection method: Connect the printer to the network via hub (L2 switch). Printer driver: Install the printer driver on each client computer. It can be delivered as a package by using EpsonNet SetupManager or automatically by using the Group Policy of the Windows server. Features: ❏ The print job starts immediately because the print job is sent to the printer directly. ❏ You can print as long as the printer runs. Related Information & "Definitions of Terms Used in this Guide" on page 8 Preparing Connection to a Network Gathering Information on the Connection Setting You need to have an IP address, gateway address, etc. for network connection. Check the following in advance. 11