Epson LQ-590IIN Users Guide - Page 80
Setting for the clients, Start, Control Panel, Security Center, Windows Firewall
View all Epson LQ-590IIN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide Windows XP/Windows Server 2003 R2/Windows Server 2003 1. Click Start, and then click Control Panel. 2. Click Security Center. 3. Click Windows Firewall to open the Windows Firewall window. 4. Make sure that Don't allow exceptions is not selected from the General tab. 5. Open the Exceptions tab, select File and Printer Sharing, and then click OK. Setting for the clients This section describes how to install the printer driver by accessing the shared printer on a network. Note: ❏ To share the printer on a Windows network, you need to set the printer server. For details, see "Setting up your printer as a shared printer" on page 76. ❏ This section describes how to access the shared printer on a standard network system using the server (Microsoft workgroup). If you cannot access the shared printer due to the network system, ask the administrator of the network for assistance. ❏ This section describes how to install the printer driver by accessing the shared printer from the Printers folder. You can also access the shared printer from Network Neighborhood or My Network on the Windows desktop. ❏ When you want to use the EPSON Status Monitor 3 at clients, you have to install both of the printer driver and the EPSON Status Monitor 3 in each client. ❏ If the printer drivers are not already installed on the client, please install them before performing these settings. 1. Right-click the Start menu, click Control Panel, then click View devices and printers. Printer Software 80