Epson LQ-800 User Manual - Page 128
Interface timing, All interface conditions are based on TTL level. Both the rise
View all Epson LQ-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
3. All interface conditions are based on TTL level. Both the rise and the fall times of each signal must be less than 0.2 microseconds. 4. Data transfer must be carried out by observing the ACKNLG or BUSY signal. (Data transfer to this printer can be carried out only after receipt of the ACKNLG signal or when the level of the BUSY signal is LOW.) Interface timing Figure F-1 shows the timing for the parallel interface. Figure F-1. Parallel interface timing F-3
3. All interface conditions are based on TTL level. Both the rise and
the fall times of each signal must be less than 0.2 microseconds.
4. Data transfer must be carried out by observing the ACKNLG or
BUSY signal. (Data transfer to this printer can be carried out only
after receipt of the ACKNLG signal or when the level of the BUSY
signal is LOW.)
Interface timing
Figure
F-1
shows the timing for the parallel interface.
Figure F-1. Parallel interface timing
F-3