Epson LS500B Quick Setup and Warranty for U.S. and Canada - Page 2

4 The default language of the menu system is English. To select another language, press the Menu button on the projector or the projector remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit. Note: To shut down the projector, press the power button on the projector or the projector remote control, then press the button again to confirm, if necessary. Adjust the image 1 To adjust the image position, move the projector in the appropriate direction while keeping it level and parallel to the screen. You can also extend or retract the front feet to correct vertical distortion, if necessary. 2 Move the focus lever at the front of the projector up or down to adjust the image sharpness. 3 If the image shape still requires adjustment, press the Menu button on the projector or the projector remote control and select Settings > Keystone > Quick Corner. Use the arrow and Enter buttons to adjust each corner. Press the Menu button to exit the menu. Note: For other image adjustments, see the online User's Guide. Using the projector remote control Install the batteries as shown (two AAA batteries). Turn projector on or off Connect to video-ondemand apps Go back to previous function Enter a selection Access projector menus Turn volume up or down Control playback of connected device Microphone Turn off audio and video temporarily Display the Android TV home screen Navigate menus Change input source Operate Android TV features using voice commands Adjust image shape (keystone) Note: • You must pair the projector remote control to the included streaming device to use Android TV and video-on-demand features. See the online User's Guide for more information. • The remote control for Android TV is only used to control the streaming device if it is connected to a different device or projector. See the online User's Guide for more information. Troubleshooting •• If you see a No Signal message after turning on the projector, check the following: •• Make sure the streaming device is properly connected to the HDMI extension cable and the USB power cable. •• For external video sources, make sure an HDMI cable is properly connected to one of the projector's HDMI ports. •• If you see a blank screen, check the following: •• Make sure the lens cap is removed. •• Make sure the flashing. power light on the projector is blue and not •• Press the power button to wake the projector from standby or sleep mode, if necessary. •• If you see a blank screen when a computer is connected, check the following: •• On some Windows® laptops, you may need to hold down the Fn key and press F7 or the function key that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate. •• If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox. •• If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries if necessary. •• The projector's USB power cable can provide 2.0A of power. Make sure your streaming device supports this specification. Registration Register today to get product updates and exclusive offers. You can register online at www.epson.com/webreg. Where to get help Manual For more information about using the projector, you can view or download the online manual from the Epson website, as described below. Internet support Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.