Epson LX-810 Product Information Guide - Page 2
Lx - 810 Dot - Matrix Printer - label printer
View all Epson LX-810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
LX - 810 DOT - MATRIX PRINTER Paper weight: Paper thickness: Single sheet: Continuous paper: Multi-part forms: Roll paper: Envelope: 14 lb to 24 lb (52 g/m2 to 9-J g/m*) 14 lb to 22 lb (52 g/m' to 62 g/m') [12 lb to 15 lb] X N ([45 g/m* to 56 g/m*] X N) Ns3 14 lb to 17 lb (52 g/m' to 64 g/m') 12 lb to 24 lb (45 g/m2 to 90 g/m*) Single sheet: Continuous paper: Roll paper: Envelope: Abel: 0.065 to 0.140 mm (0.0025 to 0.0055") 0.065 to 0.250 mm (0.0025 to 0.0098") 0.070 to 0.090 mm (0.0028 to 0.0035") 0.160 to 0.520 mm (0.0063 to 0.0197") 0.160 to 0.190 mm (0.0063 to 0.0075") including the base sheet Copy capacity: Up to 3 sheets including the original. Total thickness must not exceed 0.25 mm (0.0098"). . 24 lb paper printing is only available at normal temperature. * Label with a Pressure sensitive paper jointed by dotted or pasting and its total thickness is less than or equal to 0.3 mm (0.0118") c.m be printed out under the condition of 5'C to 35'C .md 10% to 80% RH. Mechanical Paper feeding methods: Ribbon: MCBF: MTBF: Print head /ifez Dimensions and wright: Friction Push tractor Cut sheet feeder (optional) Pull tractor (optional) Roll paper holder (optional) Cartridge ribbon, available in black: se.750 Life expectancy at 14 dots/character: 3 million characters For all components excluding print head: 3 million lines 4000 power-on hours (duty 25%) 200 million strokes/wire Height: 141 mm Width: 416 mm (excluding platen knob) Depth: 339 mm Weight: ~Pprox. 5.8 kg Electrical Vohge: 120 VAC + 10% (120 V model) 220 VAC c 10% (220 V model) 240 VAC c 10% (240 V model) Power consumption: 28 W (self test printing: draft mode) Frequency: 50.0 f 0.5 Hz, 6~10 2 0.5 Hz lnsulalion resislance: 10M ohms between AC power line and chassis Dielectric strength fbeelween AC line and chassis): I20 V model c.m wIthstand I 00 kV rms applied for one minute. 220/240 V model cm withstrnd 1.25 kV rms applied for onr minute. Environment Tempera tore: Humidity: Shock: Vibration: Operation angle: Operation: Storage: f5'C to +35-z -3O'C to f6o'C Operation: Storage: 10% to 80% (without condensation) 5% to 65% (without condensation) Operation: Storage: Up to 1 C within lms Lip to 2 C within lms Operation: Storage: Up to 0.25 G at up to 55Hz up to 0.50 c at up to 55Hz Less than 15' (without cut sheet feeder) 0' (with cut sheet feeder) Because the family of Epson printers shares .I great many commands. you can "se .m JpplicJtion program even if it does not list the LX-810 on its printer selection men". If the LX-810 is not listed, choose one of the following printers. They .we listed in order of preference. LX-600 Lx-66 LX-80 FX-850 FX-86e EX-600 FX-85 FX-SO+ FX-80 If none of these printers is listed, select the first one available on the following list: Lx FX EX RX MX Epson printer Standard printer Draft printer To "se all of the features of the LX-810, however, it is best to "se .I program with the LX-810 on its men". If your program does not list any LX printers, contact the software manufacturer to see if in update is available. -1 Lights 0 ON LINE C O N - c., OENSE0.a.. J J m) LOAD/EJECT POWER (green) On when the power switch is on and power is supplied. READY (green) On when the printer is ready to accept input d&e Flickers while data IS printed. PAPER OUT (red) On when the printer is out of paper or when contmuuus p.~per LS in .I standby position. The printer .~lso beeps when it is out 0i paper. ON LINE (green) On when the printer is on line .d ready to accept d.lt.1 from the computer When this light 1s flickering. the micro-.jdlustment ic.lturc can be wd. LX-810-2 5/1/89 9 - Pin Printers