Epson MX-80II F/T User Manual - Page 16
Separator Installation, Paper Loading, Loading of fanfold paper
View all Epson MX-80II F/T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5. Separator Installation The separator of the Printer contributes to smooth paper feeding. Set the separator by inserting its edge into the two holes located at the rear part of the frame of the printer mechanism. (See Fig. 11.) Fig. 11 Separator Installation 6. Paper Loading 6.1. Loading of fanfold paper The MX-80 Type II Printer accommodates fanfold paper from 4" to 10" in width. To load the fanfold paper, observe the following procedure. STEP 1. Raise the printer lid. STEP 2. Turn the scale toward the front of the Printer and detach it from the platen. STEP 3. Confirm that the paper guide roller is at the center of the sprocket shaft. If not, set it at the center of the shaft. NOTE: The paper guide roller contributes to smooth paper feeding. STEP 4. Raise the two paper holding covers, and be sure to insert the fanfold paper between the frame and plastic roller of the separator. (See Fig. 12.) -10-