Epson Moverio BT-30C Safety Instructions and Notices - Page 3

List of safety symbols and instructions The following table lists the meaning of the safety symbols labeled on the equipment. No. Symbol mark Approved standards Description 1 IEC60417 "ON" (power) No.5007 To indicate connection to the mains. No. Symbol mark Approved standards Description 8 IEC60417 Earth No.5017 To identify an earth (ground) terminal. 2 IEC60417 No.5008 "OFF" (power) To indicate disconnection from the mains. 9 IEC60417 No.5032 Alternating current To indicate on the rating plate that the equip- ment is suitable for alternating current only; to identify relevant terminals. 3 IEC60417 Stand-by No.5009 To identify the switch or switch position by 10 IEC60417 Direct current means of which part of the equipment is No.5031 To indicate on the rating plate that the equip- switched on in order to bring it into the stand- ment is suitable for direct current only; to by condition. identify relevant terminals. 4 ISO7000 Caution 11 No.0434B To identify general caution when using the IEC3864-B3.1 product. IEC60417 No.5172 Class II equipment To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. 5 IEC60417 Caution, risk of electric shock 12 ISO 3864 General prohibition No.6042 To identify equipment that has risk of electric To identify actions or operations that are pro- ISO3864-B3.6 shock. hibited. 6 IEC60417 For indoor use only 13 ISO 3864 Contact prohibition No.5957 To identify electrical equipment designed pri- To indicate injury that could occur due to marily for indoor use. touching a specific part of the equipment. 7 IEC60417 Polarity of DC power connector 14 IEC60417 Standby, partial standby No.5926 To identify the positive and negative connec- No.5266 To indicate that part of the equipment is in the tions (the polarity) on a piece of equipment to ready status. which a d.c. power supply may be connected. General notes Restriction of Use This product is manufactured based on the specifications of the country of sale. When using this product outside the country of sale, contact your nearest support center. When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, please make your own judgment on this product's suitability after a full evaluation. Authentication information U.S.A/Canada Supplier's DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We : Epson America, Inc. Located at : 3840 Kilroy Airport Way MS : 3-13 Long Beach, CA 90806 Tel : 562-981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Trade Name : EPSON Type of Product : Smart Glasses Model : H962A FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Canada CAN ICES-3 (B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numèrique de la classe B est conforme à la norme NMB-003 du Canada. Indication of the manufacturer and the importer in accordance with requirements of EU directive Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Telephone: 81-266-52-3131 http://www.epson.com/ Importer: EPSON EUROPE B.V. Address: Atlas Arena, Asia Building Hoogoorddreef 5, 1101 BA Amsterdam Zuidoost The Netherlands Telephone: 31-20-314-5000 http://www.epson.eu/