Epson Moverio BT-35E Users Guide - Page 15
Supported Equipment and Software p.27, When using the headset sensors or camera
View all Epson Moverio BT-35E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting the Interface Unit and External Devices Notes on displaying images by USB Type-C • This product supports DisplayPort Alternate mode (DP Alt mode) for USB Type-C. ➡➡"Supported Equipment and Software" p.27 • To display images using USB Type-C, the connected device must support video output by USB Type-C. • Depending on the device, displaying images may not be supported. See the manual supplied with the equipment you want to connect for more information. Notes on supplying power by USB Type-C • This product supports USB Type-C Current @ 1.5 A. • Check that the connected equipment supports a power supply of 5 V/1.5 A or more by USB Type-C. • If power cannot be supplied from the connected equipment, connect the AC adapter supplying power to the Micro-B port. • Power supplied from the Micro-B port has priority over this product. If you change power supply during use, the product turns off temporarily. If you are using the sensor/camera feature, make sure you reconfigure the connected device as necessary. When using the headset sensors or camera Data from the sensors and camera built into the headset are output from the USB-C port. Some devices do not support the use of data from sensors or cameras. See the following for more details. ➡➡"Supported Equipment and Software" p.27 15