Epson Moverio BT-40S Safety Instructions and Notices - Page 3

List of safety symbols and instructions These are the safety symbols labeled on the equipment. Symbol Approved standards Description IEC60417 No.5007 "ON" (power) To indicate connection to the mains. IEC60417 No.5008 "OFF" (power) To indicate disconnection from the mains. IEC60417 No.5009 Stand-by To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition. ISO7000 Caution No.0434B To identify general caution when using the product. IEC3864-B3.1 IEC60417 Caution, risk of electric shock No.6042 To identify equipment that has risk of electric shock. ISO3864-B3.6 IEC60417 No.5957 For indoor use only To identify electrical equipment designed primarily for indoor use. IEC60417 No.5926 Polarity of DC power connector To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC power supply may be connected. IEC60417 No.5017 Earth To identify an earth (ground) terminal. IEC60417 No.5032 Alternating current To indicate on the rating plate that the equipment is suitable for alternating current only; to identify relevant terminals. IEC60417 No.5031 Direct current To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. IEC60417 No.5172 ISO 3864 ISO 3864 IEC60417 No.5266 Class II equipment To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140. General prohibition To identify actions or operations that are prohibited. Contact prohibition To indicate injury that could occur due to touching a specific part of the equipment. Standby, partial standby To indicate that part of the equipment is in the ready status. General notes Restriction of Use This product is manufactured based on the specifications of the country of sale. When using this product outside the country of sale, contact your nearest support center. When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability. Because this product was not intended for use in applications requiring extremely high reliability/safety such as aerospace equipment, main communication equipment, nuclear power control equipment, or medical equipment related to direct medical care, please make your own judgment on this product's suitability after a full evaluation. Authentication information U.S.A./Canada Supplier's Declaration of Conformity According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We : Epson America, Inc. Located at : 3131 Katella Avenue, Los Alamitos, CA Tel : 562-981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.906. Trade Name : EPSON® Type of Product : Smart Glasses Model : H969A FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Canada CAN ICES-3 (B)/NMB-3(B) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Where to get help Manual See the User's Guide for general setup and usage information. Telephone support services To speak with a support specialist, call (562) 276-4394 (U.S.) or (905) 709-3839 (Canada), 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet support Visit www.epson.com (U.S.) or www.epson.ca (Canada) and search for your product to view manuals, get FAQs, or contact Epson. Registration You can register online at www.epson.com/webreg. Epson America, Inc. Limited Warranty 2-Year Moverio Glasses Limited Warranty and 90-Day Accessories Limited Warranty Terms and Conditions A. What Is Covered: Epson America, Inc. ("Epson") warrants to the original purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States, Canada, or Puerto Rico, will conform to the manufacturer's specifications, and will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase. Accessories included with the product are warranted for 90 days. This warranty is not transferable. B. What Epson Will Do To Correct Problems: Should your hardware product prove defective during the limited warranty period, please call Epson at the number at the end of this statement. An Epson service technician will answer during Epson's regular support hours (currently 6:00 am to 8:00 pm Pacific Time, Monday through Friday, and 7:00 am to 4:00 pm on Saturdays-subject to change), and provide telephone diagnostics to determine whether the product requires service. When you call, please be prepared to provide the unit serial number and original date of purchase. You may also need to provide proof of purchase if the technician cannot verify warranty coverage using the serial number. If warranty service is required, Epson will replace the defective unit without charge for parts or labor. If Epson authorizes an exchange for the defective unit, we will ship a replacement product to you, freight prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. The replacement unit will use Epson standard configurations and if applicable, default operating systems settings. Your data and applications cannot be restored and should be backed up by you before you return the defective unit. The replacement product may be new or refurbished to the Epson standard of quality. You are responsible for securely packaging the defective unit and returning it to Epson within five (5) working days of receipt of the replacement. Epson requires a debit or credit card number to secure the cost of the replacement product in the event you fail to return the defective one. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. If Epson cannot provide service on your product for any reason and no longer sells the same model, we will replace your product with a model of equal or superior value. Replacement products or parts assume the remaining warranty period of the original product. Accessory items, such as lens shades, are warranted for 90 days. C. What This Warranty Does Not Cover: 1. Any damage caused by misuse, abuse, improper installation, or neglect; disasters such as fire, flood, or lightning; or improper electrical currents, software, or interaction with non-Epson products 2. Any damage caused by or any service for third-party software, applications, parts, components, or peripheral devices added to the product after its shipment from Epson, such as dealer- or user-added boards, components, or cables 3. Damage due to excessive, continual usage 4. Damage caused by failure to properly maintain the product (see your User's Guide for details) 5. Service when the product is used outside the U.S., Canada, or Puerto Rico 6. Warranty service if the product label, logo, rating label, or serial number has been removed 7. Consumables or any items that are identified as being replaceable by the user in the product documentation (see your User's Guide for details) 8. Loss of data 9. Any damage from service performed by anyone other than an Epson Authorized Servicer 10. D amage resulting from operation or storage in areas with smoke, oil, high humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock 11. C osmetic damage caused by handling or normal wear and tear during use 12. A ny product or parts purchased as used, refurbished, or reconditioned