Epson NX400 Start Here - Page 2
Install cartridges - ink
 |
UPC - 010343872103
View all Epson NX400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
3 Install cartridges Note: Do not load paper yet. 1 Lift up the scanner. 2 Open the cartridge cover. 3 Shake the ink cartridges gently 4 or 5 times, then unpack them. 4 Remove only the yellow tape from each cartridge. Caution: Do not remove any other seals or the cartridge may leak. 5 Insert the cartridges in the holder for each color. 6 Press each cartridge down until it clicks. 7 Close the cartridge cover. Press down until it clicks. 8 Lower the scanner.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Install cartridges
Note:
Do not load paper yet.
1
Lift up the scanner.
2
Open the cartridge
cover.
3
Shake the ink cartridges gently
4 or 5 times, then unpack them.
4
Remove only the yellow tape from each cartridge.
Caution:
Do not remove
any other seals or the
cartridge may leak.
5
Insert the cartridges in the holder for
each color.
6
Press each cartridge down until it clicks.
7
Close the cartridge cover. Press down until
it clicks.
8
Lower the scanner.
3