Epson P400 User Manual - Page 3

Install Software, Mobile printing, Any problems?, Any questions?, NOT CONNECTED - screen printing

Get Epson P400 PDF manuals and user guides View all Epson P400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

4 Attach the single sheet guide by aligning the notches on its base with the slots on the back of the printer. Then hook the tabs over the top of the slot (marked with orange triangles). 5 Turn on the printer so it can load the paper correctly. 6 Insert one sheet of paper printable side up against the right edge, then slide the edge guide over. Note: Don't load paper sideways. Always load it short edge first. 7 Push the paper into the printer until it meets resistance and hold it there until the printer pulls it in slightly. When the printer begins feeding the paper, let go of it. Install Software Note: An Internet connection is required to obtain the printer software. 1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Download and run your product's software package: www.epson.com/support/p400downloads (U.S.) www.epson.ca/support/p400downloads (Canada) 3 Follow the instructions on the screen to run the setup program. OS X: Make sure you install Epson Software Updater to receive firmware and software updates for your product. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection  In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection  Make sure you have a USB cable (not included).  • Wired network connection  Make sure you have an Ethernet cable (not included). Mobile printing To print from a mobile device, your product must be set up for wireless printing or Wi-Fi Direct®. See the online User's Guide for instructions. iOS/Android™ Epson Connect™ Connect wirelessly from your tablet, smartphone, or computer. Print documents and photos from across the room or around the world. www.epson.com/iprint www.epson.com/connect Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). The printer can only connect to a network that support 2.4 GHz. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Passwords must be entered in the correct case. Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown: Any questions? Basics Basic information and troubleshooting. User's Guide Windows: Click the icon on your desktop or Apps screen to access the online User's Guide. OS X: Click the icon in Applications/Epson Software/Guide to access the online User's Guide. If you don't have a User's Guide icon, go to the Epson website, as described in the next section.

  • 1
  • 2
  • 3
  • 4
4
Attach the single sheet guide by aligning the notches on its base with the
slots on the back of the printer. Then hook the tabs over the top of the
slot (marked with orange triangles).
5
Turn on the printer so it can load the paper correctly.
6
Insert one sheet of paper printable side up against the right edge, then
slide the edge guide over.
Note:
Don’t load paper sideways. Always load it short edge first.
7
Push the paper into the printer until it meets resistance and hold it there
until the printer pulls it in slightly. When the printer begins feeding the
paper, let go of it.
Install Software
Note:
An Internet connection is required to obtain the printer software.
1
Make sure the printer is
NOT CONNECTED
to your
computer.
Windows
®
:
If you see a Found New
Hardware screen, click
Cancel
and
disconnect the USB cable.
2
Download and run your product’s software package:
www.epson.com/support/p400downloads
(U.S.)
www.epson.ca/support/p400downloads
(Canada)
3
Follow the instructions on the screen to run the setup program.
OS X:
Make sure you install Epson Software Updater to receive firmware
and software updates for your product.
4
When you see the Select Your Connection screen, select one of the
following:
•
Wireless connection
In most cases, the software installer automatically attempts to set up
your wireless connection. If setup is unsuccessful, you may need to
enter your network name (SSID) and password.
•
Direct USB connection
Make sure you have a USB cable (not included).
•
Wired network connection
Make sure you have an Ethernet cable (not included).
Mobile printing
To print from a mobile device, your product must be set up for wireless
printing or Wi-Fi Direct
®
. See the online
User’s Guide
for instructions.
iOS/Android
™
Epson Connect
™
Connect wirelessly from your tablet,
smartphone, or computer. Print documents
and photos from across the room or around
the world.
www.epson.com/iprint
www.epson.com/connect
Any problems?
Network setup was unsuccessful.
•
Make sure you select the right network name (SSID). The printer can only
connect to a network that support 2.4 GHz.
•
If you see a firewall alert message, click
Unblock
or
Allow
to let setup
continue.
•
If your network has security enabled, make sure you enter your network
password (WEP key or WPA passphrase) correctly. Passwords must be
entered in the correct case.
Setup is unable to find my printer after connecting it with a
USB cable.
Make sure it is securely connected as shown:
Any questions?
Basics
Basic information and troubleshooting.
User’s Guide
Windows:
Click the icon on your desktop or Apps screen to access the online
User’s Guide
.
OS X:
Click the icon in
Applications/Epson Software/Guide
to access the
online
User’s Guide
.
If you don’t have a
User’s Guide
icon, go to the Epson website, as described in
the next section.