Epson P800 User Manual - Page 3

Install Software, Mobile printing, Any problems?, Network setup was unsuccessful.

Get Epson P800 PDF manuals and user guides View all Epson P800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

4 Press the front cover to open it, then press the center of the manual feed tray to extend it. 5 Insert a single sheet of fine art media. Insert it short end first with the printable side faceup. 6 Feed the paper up to the line on the tray. Make sure the paper is flush against the right, then pull the paper back gently to align it against the edge of the manual feed tray. 7 Press Load on the LCD screen. The paper loads into the printer. 8 When you see a message on the screen, close the manual feed tray by pushing it in until it latches. 9 Fully extend the output tray. 10 Select your Paper Size and Paper Type and press OK. Install Software Note: An Internet connection is required to obtain the printer software. 1 Make sure the printer is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Download and run your product's software package: epson.com/support/p800 (U.S.) epson.ca/support/p800 (Canada) 3 Follow the instructions on the screen to run the setup program. OS X: Make sure you install Software Updater to receive firmware and software updates for your product. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection  In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password.  • Direct USB connection  Make sure you have a USB cable (not included).  • Wired network connection  Make sure you have an Ethernet cable (not included). Mobile printing To print from a mobile device, your product must be set up for wireless printing or Wi-Fi® Direct®. See the online User's Guide for instructions. iOS/Android™ Epson Connect™  Connect wirelessly from your tablet, smartphone, or computer. Print documents and photos from across the room or around the world. epson.com/iprint epson.com/connect Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). The product can only connect to a network that supports 2.4 GHz. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Passwords must be entered in the correct case. The printer's screen is dark. Make sure your product is turned on and press any button or touch the screen to wake it from sleep mode. Setup is unable to find my printer after connecting it with a USB cable. Make sure the printer is on and securely connected as shown:

  • 1
  • 2
  • 3
  • 4
4
Press the front cover to open it, then press the center of the manual feed
tray to extend it.
5
Insert a single sheet of fine art media. Insert it short end first with the
printable side faceup.
6
Feed the paper up to the line on the tray. Make sure the paper is flush
against the right, then pull the paper back gently to align it against the
edge of the manual feed tray.
7
Press
Load
on the LCD screen. The paper loads into the printer.
8
When you see a message on the screen, close the manual feed tray by
pushing it in until it latches.
9
Fully extend the output tray.
10
Select your
Paper Size
and
Paper Type
and press
OK
.
Install Software
Note:
An Internet connection is required to obtain the printer software.
1
Make sure the printer is
NOT CONNECTED
to your
computer.
Windows
®
:
If you see a Found New
Hardware screen, click
Cancel
and
disconnect the USB cable.
2
Download and run your product’s software package:
epson.com/support/p800
(U.S.)
epson.ca/support/p800
(Canada)
3
Follow the instructions on the screen to run the setup program.
OS X:
Make sure you install Software Updater to receive firmware and
software updates for your product.
4
When you see the Select Your Connection screen, select one of the
following:
•
Wireless connection
In most cases, the software installer automatically attempts to set up
your wireless connection. If setup is unsuccessful, you may need to
enter your network name (SSID) and password.
•
Direct USB connection
Make sure you have a USB cable (not included).
•
Wired network connection
Make sure you have an Ethernet cable (not included).
Mobile printing
To print from a mobile device, your product must be set up for wireless
printing or Wi-Fi
®
Direct
®
. See the online
User’s Guide
for instructions.
iOS/Android™
Epson Connect™
Connect wirelessly from your tablet,
smartphone, or computer. Print documents
and photos from across the room or around the
world.
epson.com/iprint
epson.com/connect
Any problems?
Network setup was unsuccessful.
•
Make sure you select the right network name (SSID). The product can
only connect to a network that supports 2.4 GHz.
•
If you see a firewall alert message, click
Unblock
or
Allow
to let setup
continue.
•
If your network has security enabled, make sure you enter your network
password (WEP key or WPA passphrase) correctly. Passwords must be
entered in the correct case.
The printer’s screen is dark.
Make sure your product is turned on and press any button or touch the screen
to wake it from sleep mode.
Setup is unable to find my printer after connecting it with a
USB cable.
Make sure the printer is on and securely connected as shown: