Epson PP 100 User Manual - Page 25
Drive Settings, Batch Mode, Drive to be used, Number of write retries - batch mode error
View all Epson PP 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Batch Mode This mode uses stacker 1 and 2 as the input stackers, and stacker 2 and 3 as the output stackers. You can create up to 100 CDs/DVDs at once without refilling and taking out discs while publishing. Up to 1000 CDs/DVDs can be continuously published in a single job by refilling discs and taking out published discs. To use this mode, you need to place stacker 3 into the product. & See "Batch Mode" on page 56. Drive Settings Drive to be used Select Drive to Use from the following. Use Both Use both drive 1 and 2 to write data. Job will be efficiently processed by using 2 drives. If trouble occurrs on either drive and it cannot write data, other drive will be used automatically. Use Drive 1 Only Use only drive 1. Use Drive 2 Only Use only drive 2. Number of write retries Select 0 to 9 for the Number of write retries. The Number of write retries is a setting to retry writing if a write error occurs. Setting the Number of write retries will enable the job to continue without pausing if a write error occurrs. Publishing Discs 25