Epson Perfection 4490 Office Product Information Guide - Page 5

Epson Perfection 4490 Photo 2. Open the scanner cover and gently slide up the document mat to remove it. Also make sure the transparency unit transportation lock is unlocked. Placing Film in the Holder Placing 35 mm Film Strips 1. Open the film strip cover(s) on the film holder. 2. Slide one or two film strips all the way into the film holder with the shiny base side facing down. Your images and any wording on the film strips should appear backwards on the side that faces up. 3. Use a soft cloth to wipe the transparency unit window and the document table before placing your film or slides. Transparency unit window Note: Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the film. Make sure the white stickers on the back of the film holder and the areas around them are not scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble recognizing your film in Full Auto Mode. Do not cover any of the tiny holes in the film holder or the scanner may have trouble recognizing which film holder you are using. 3. Close the covers over the film and press them down until they click. Then press down on all the edges of the covers to secure them. To place film for scanning, see "Placing Film in the Holder" below. To place slides for scanning, see "Placing Slides in the Holder" on page 6. 4/05 Epson Perfection 4490 Photo - 5