Epson Perfection 4990 Photo Start Here Card - Page 1

Start Here Epson® Perfection® 4990 Unpack Your Scanner 1 Make sure you have all the parts shown below for your Epson scanner: Scanner CD-ROM with EPSON Scan driver, software, and electronic manuals Adobe® Photoshop® Elements CD-ROM LaserSoft ImagingTM SilverFast® SE CD-ROM Scanner cover/transparency unit Document mat Film area guide USB cable Film holders Note: If you'll be connecting your scanner using IEEE 1394 (FireWire® or iLinkTM), you'll need to purchase an IEEE 1394 cable (not included). 2 Remove all the packing tape, but leave the large sticker in place until you are instructed to remove it. IMPORTANT! Leave the sticker in place until you are instructed to remove it 3 Insert the hinges on the cover into the square holes at the back of the scanner. 4 Slide the transportation lock to the unlocked position. 5 Attach the document mat. Hold the top of the document mat and slide it down gently along the document cover. Make sure the tabs on the bottom and sides of the document mat fit in the slots on the document cover. 6 Close the cover. CPD-18892 Printed in XXXXXX XX.XX-XX XXX