Epson Perfection V800 Photo Notices and Warranty - Page 1

Epson Perfection V800 Photo Manual

Page 1 highlights

Notices FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. For Canadian Users CAN ICES-3(B)/NMB-3(B) Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: We: Epson America, Inc. Located at: MS 3-13 3840 Kilroy Airport Way Long Beach, CA 90806-2469 Telephone: (562) 981-3840 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Trade Name: Epson Type of Product: Image scanner Model: J221B Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc. ("Epson") warrants to the original retail purchaser that the Epson product covered by this limited warranty statement, if purchased and operated only in the United States, Canada, or Puerto Rico, will be free from defects in workmanship and materials for a period of one (1) year from the date of original purchase. For warranty service, you must provide proof of the date of original purchase. What Epson Will Do To Correct Problems: Should your Epson product prove defective during the warranty period, please call the Epson ConnectionSM at (562) 276-4382 (U.S.) or (905) 709-3839 (Canada) for warranty repair instructions and return authorization. An Epson service technician will provide telephone diagnostic service to determine whether the product requires service. If service is needed, Epson will, at its option, exchange or repair the product without charge for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will ship a replacement product to you, freight prepaid, so long as you use an address in the United States, Canada, or Puerto Rico. Shipments to other locations will be made freight collect. You are responsible for securely packaging the defective unit and returning it to Epson within five (5) working days of receipt of the replacement. Epson requires a debit or a credit card number to secure the cost of the replacement product in the event that you fail to return the defective one. If Epson authorizes repair instead of exchange, Epson will direct you to send your product to Epson or its authorized service center, where the product will be repaired and sent back to you. You are responsible for packing the product and for all costs to and from the Epson authorized service center. When warranty service involves the exchange of the product or a part, the item replaced becomes Epson property. The replacement product or part may be new or refurbished to the Epson standard of quality, and, at Epson's option, may be another model of like kind and quality. Exchange products and parts assume the remaining warranty period of your original product covered by this limited warranty. What This Warranty Does Not Cover: This warranty covers only normal use in the United States, Canada, or Puerto Rico. This warranty is not transferable. This warranty does not cover damage to the Epson product caused by parts or supplies not manufactured, distributed or certified by Epson. This warranty does not cover third party parts, components, or peripheral devices added to the Epson product after its shipment from Epson, e.g., dealer or user-added boards or components. Epson is not responsible for warranty service should the Epson label or logo or the rating label or serial number be removed or should the product fail to be properly maintained or fail to function properly as a result of misuse, abuse, improper installation, neglect, improper shipping, damage caused by disasters such as fire, flood, and lightning, improper electrical current, software problems, interaction with non-Epson products, or service other than by an Epson Authorized Servicer. If a claimed defect cannot be identified or reproduced, you will be held responsible for the costs incurred. DISCLAIMER OF WARRANTIES: THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID. Remedies: Your exclusive remedy and Epson's entire liability for a material breach of this Agreement will be limited to a refund of the price paid for the Epson products covered by this Agreement. Any action for breach of warranty must be brought within 3 months of the expiration date of the warranty. Epson is not liable for performance delays or for nonperformance due to causes beyond its reasonable control. Except as provided in this written warranty, neither Epson nor its affiliates shall be liable for any loss, inconvenience, or damage, including direct, special, incidental or consequential damages, including lost profits, cost of substitute equipment, downtime, claims of third parties, including customers, or injury to property, resulting from the use or inability to use the Epson products, whether resulting from a breach of warranty or any other legal theory. Some jurisdictions do not allow limits on warranties or remedies for breach in certain transactions. In such jurisdictions, the limits in this paragraph and the preceding paragraph may not apply. In Canada, warranties include both warranties and conditions. Arbitration, Governing Laws: Any disputes arising out of this Agreement will be settled by arbitration to be conducted before a single arbitrator, in Los Angeles, California, in accordance with the commercial Arbitration Rules of the American Arbitration Association, and judgment upon the award rendered by the arbitrator may be entered in any court having jurisdiction thereof. This Agreement shall be construed in accordance with the laws of the State of California, except this arbitration clause which shall be construed in accordance with the Federal Arbitration Act. To find the Epson Authorized Reseller nearest you, please visit our website at: epson.com. To find the Epson Customer Care Center nearest you, please visit epson.com/support. You can also write to: Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012 EPSON is a registered trademark of Seiko Epson Corporation. Epson Connection is a service mark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. Avis Déclaration de conformité FCC Pour les utilisateurs des États-Unis À l'issue des tests dont il a fait l'objet, cet appareil a été déclaré conforme aux normes des appareils numériques de classe B, conformément à la partie 15 de la réglementation FCC. Ces normes sont destinées à assurer un niveau de protection adéquat contre les interférences dans les installations résidentielles. Cet appareil produit, utilise et peut émettre des fréquences radioélectriques et, s'il n'est pas installé ou utilisé conformément aux directives, peut brouiller les ondes radio ou télévisuelles. Toutefois, il est impossible de garantir qu'aucune interférence ne se produira dans une installation particulière. Si cet équipement brouille la réception des ondes radio et télévisuelles, ce que vous pouvez déterminer en éteignant et en rallumant l'équipement, nous vous encourageons à prendre l'une ou plusieurs des mesures correctives suivantes : • Réorientez ou déplacez l'antenne. • Éloignez l'appareil du récepteur. • Branchez l'appareil dans une autre prise ou dans un autre circuit que celui du récepteur. • Demandez conseil au revendeur de l'appareil ou à un technicien radio/télévision expérimenté. AVERTISSEMENT : Le branchement d'un câble d'interface non blindé à ce matériel entraînera l'annulation de l'homologation FCC de cet appareil et risque de causer des interférences dépassant les limites établies par la FCC pour ce matériel. Il incombe à l'utilisateur de se procurer et d'utiliser un câble d'interface blindé avec cet appareil. Si le matériel est doté de plusieurs connecteurs d'interface, évitez de connecter des câbles à des interfaces inutilisées. Toute modification non expressément autorisée par le fabricant peut annuler la permission d'utilisation du matériel. Pour les utilisateurs du Canada CAN ICES-3(B)/NMB-3(B)

  • 1
  • 2
  • 3
  • 4

Notices
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio or television reception. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to
radio and television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
WARNING: The connection of a non-shielded equipment
interface cable to this equipment will invalidate the FCC
Certification of this device and may cause interference levels
which exceed the limits established by the FCC for this
equipment. It is the responsibility of the user to obtain and
use a shielded equipment interface cable with this device. If
this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or
modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
For Canadian Users
CAN ICES-3(B)/NMB-3(B)
Declaration of Conformity
According to 47CFR, Part 2 and 15 for Class B Personal
Computers and Peripherals; and/or CPU Boards and Power
Supplies used with Class B Personal Computers:
We:
Epson America, Inc.
Located at: MS 3-13
3840 Kilroy Airport Way
Long Beach, CA 90806-2469
Telephone: (562) 981-3840
Declare under sole responsibility that the product identified
herein, complies with 47CFR Part 2 and 15 of the FCC rules
as a Class B digital device. Each product marketed, is
identical to the representative unit tested and found to be
compliant with the standards. Records maintained continue
to reflect the equipment being produced can be expected to
be within the variation accepted, due to quantity production
and testing on a statistical basis as required by 47CFR
§2.909. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired
operation.
Trade Name:
Epson
Type of Product: Image scanner
Model:
J221B
Epson America, Inc. Limited Warranty
What Is Covered:
Epson America, Inc. (“Epson”) warrants to
the original retail purchaser that the Epson product covered
by this limited warranty statement, if purchased and
operated only in the United States, Canada, or Puerto Rico,
will be free from defects in workmanship and materials for a
period of one (1) year from the date of original purchase. For
warranty service, you must provide proof of the date of
original purchase.
What Epson Will Do To Correct Problems:
Should your Epson
product prove defective during the warranty period, please
call the Epson Connection
SM
at (562) 276-4382 (U.S.) or
(905) 709-3839 (Canada) for warranty repair instructions
and return authorization. An Epson service technician will
provide telephone diagnostic service to determine whether
the product requires service. If service is needed, Epson will,
at its option, exchange or repair the product without charge
for parts or labor. If Epson authorizes an exchange for the
defective unit, Epson will ship a replacement product to you,
freight prepaid, so long as you use an address in the United
States, Canada, or Puerto Rico. Shipments to other locations
will be made freight collect. You are responsible for securely
packaging the defective unit and returning it to Epson
within five (5) working days of receipt of the replacement.
Epson requires a debit or a credit card number to secure the
cost of the replacement product in the event that you fail to
return the defective one. If Epson authorizes repair instead of
exchange, Epson will direct you to send your product to
Epson or its authorized service center, where the product will
be repaired and sent back to you. You are responsible for
packing the product and for all costs to and from the Epson
authorized service center. When warranty service involves
the exchange of the product or a part, the item replaced
becomes Epson property. The replacement product or part
may be new or refurbished to the Epson standard of quality,
and, at Epson’s option, may be another model of like kind
and quality. Exchange products and parts assume the
remaining warranty period of your original product covered
by this limited warranty.
What This Warranty Does Not Cover:
This warranty covers
only normal use in the United States, Canada, or Puerto
Rico. This warranty is not transferable. This warranty does
not cover damage to the Epson product caused by parts or
supplies not manufactured, distributed or certified by Epson.
This warranty does not cover third party parts, components,
or peripheral devices added to the Epson product after its
shipment from Epson, e.g., dealer or user-added boards or
components. Epson is not responsible for warranty service
should the Epson label or logo or the rating label or serial
number be removed or should the product fail to be properly
maintained or fail to function properly as a result of misuse,
abuse, improper installation, neglect, improper shipping,
damage caused by disasters such as fire, flood, and lightning,
improper electrical current, software problems, interaction
with non-Epson products, or service other than by an Epson
Authorized Servicer. If a claimed defect cannot be identified
or reproduced, you will be held responsible for the costs
incurred.
DISCLAIMER OF WARRANTIES: THE WARRANTY
AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESSED OR
IMPLIED WARRANTIES INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT. UNLESS
STATED HEREIN, ANY STATEMENTS OR
REPRESENTATION MADE BY ANY OTHER PERSON
OR FIRM ARE VOID.
Remedies:
Your exclusive remedy and Epson's entire liability
for a material breach of this Agreement will be limited to a
refund of the price paid for the Epson products covered by
this Agreement. Any action for breach of warranty must be
brought within 3 months of the expiration date of the
warranty. Epson is not liable for performance delays or for
nonperformance due to causes beyond its reasonable control.
Except as provided in this written warranty, neither Epson
nor its affiliates shall be liable for any loss, inconvenience, or
damage, including direct, special, incidental or consequential
damages, including lost profits, cost of substitute equipment,
downtime, claims of third parties, including customers, or
injury to property, resulting from the use or inability to use
the Epson products, whether resulting from a breach of
warranty or any other legal theory. Some jurisdictions do not
allow limits on warranties or remedies for breach in certain
transactions. In such jurisdictions, the limits in this
paragraph and the preceding paragraph may not apply.
In Canada, warranties include both warranties and
conditions.
Arbitration, Governing Laws:
Any disputes arising out of this
Agreement will be settled by arbitration to be conducted
before a single arbitrator, in Los Angeles, California, in
accordance with the commercial Arbitration Rules of the
American Arbitration Association, and judgment upon the
award rendered by the arbitrator may be entered in any court
having jurisdiction thereof. This Agreement shall be
construed in accordance with the laws of the State of
California, except this arbitration clause which shall be
construed in accordance with the Federal Arbitration Act.
To find the Epson Authorized Reseller nearest you, please
visit our website at: epson.com.
To find the Epson Customer Care Center nearest you, please
visit epson.com/support.
You can also write to: Epson America, Inc., P.O. Box 93012,
Long Beach, CA 90809-3012
EPSON is a registered trademark of Seiko Epson Corporation.
Epson Connection is a service mark of Epson America, Inc.
General Notice: Other product names used herein are for identification
purposes only and may be trademarks of their respective owners. Epson
disclaims any and all rights in those marks.
This information is subject to change without notice.
Avis
Déclaration de conformité FCC
Pour les utilisateurs des États-Unis
À l’issue des tests dont il a fait l’objet, cet appareil a été
déclaré conforme aux normes des appareils numériques de
classe B, conformément à la partie 15 de la réglementation
FCC. Ces normes sont destinées à assurer un niveau de
protection adéquat contre les interférences dans les
installations résidentielles. Cet appareil produit, utilise et
peut émettre des fréquences radioélectriques et, s’il n’est pas
installé ou utilisé conformément aux directives, peut
brouiller les ondes radio ou télévisuelles. Toutefois, il est
impossible de garantir qu’aucune interférence ne se produira
dans une installation particulière. Si cet équipement brouille
la réception des ondes radio et télévisuelles, ce que vous
pouvez déterminer en éteignant et en rallumant
l’équipement, nous vous encourageons à prendre l’une ou
plusieurs des mesures correctives suivantes :
Réorientez ou déplacez l’antenne.
Éloignez l’appareil du récepteur.
Branchez l’appareil dans une autre prise ou dans un autre
circuit que celui du récepteur.
Demandez conseil au revendeur de l’appareil ou à un
technicien radio/télévision expérimenté.
AVERTISSEMENT : Le branchement d’un câble d’interface
non blindé à ce matériel entraînera l’annulation de
l’homologation FCC de cet appareil et risque de causer des
interférences dépassant les limites établies par la FCC pour ce
matériel. Il incombe à l’utilisateur de se procurer et d’utiliser
un câble d’interface blindé avec cet appareil. Si le matériel est
doté de plusieurs connecteurs d’interface, évitez de connecter
des câbles à des interfaces inutilisées. Toute modification
non expressément autorisée par le fabricant peut annuler la
permission d’utilisation du matériel.
Pour les utilisateurs du Canada
CAN ICES-3(B)/NMB-3(B)