Epson PowerLite 1716 Operation Guide - EasyMP Monitor v4.40 - Page 9
Limitations imposed by a Windows Vista or Windows 7 environment, Before starting operations, From here - user guide
View all Epson PowerLite 1716 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing EasyMP Monitor 9 C From here, continue with the installation by following the on-screen messages. Limitations imposed by a Windows Vista or Windows 7 environment When using EasyMP Monitor under Windows Vista or Windows 7, note the following limitations. • You must have administrator authority in order to use Register at startup on the Environment setup screen of EasyMP Monitor. s p.27 • If EasyMP Monitor is installed on your computer, uninstall it before you update the operating system to Windows Vista or Windows 7. Updating your OS without uninstalling the software may cause a malfunction. s p.46 Before starting operations Check the following points before starting up EasyMP Monitor. • EasyMP Monitor must be installed on the computer to be used for monitoring and control. • The computer and the projectors must be connected to the network. • If using Windows 2000/Windows NT4.0/Windows XP/Windows Vista/Windows 7, the computer must be started up in Administrator mode. • Depending on the projector model, a commercially-available serial W TCP/IP conversion adapter and a connection cable are required in order to use EasyMP Monitor. s Projector's User's Guide Make the settings for the serial W TCP/IP conversion adapter before connecting to the projector.