Epson PowerLite 1716 Quick Setup - Page 1

PowerLite® 1716 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. 1 Turn On Your Equipment 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image. Focus Zoom 3 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place it directly in front of the screen, facing the screen squarely. 4 If your image looks like or , press the or buttons on the projector to correct it. 2 Open the A/V Mute slide (lens cover). Make sure the slide is opened completely. 3 Remove the battery cover on the remote control. Locate the two AA batteries that came with the projector and insert them. Then replace the battery cover. 4 To turn the projector on, press the Power button on the projector or the remote control. The projector beeps once, and the projector's power light flashes green and then stays on. Power light Power button To shut down the projector, press the Power button twice and simply unplug it. You don't have to wait for the projector to cool off. 3 C hoose a Presentation Method How do you want to get images to the projector? • To connect to a notebook, see "If connecting to a notebook" below. • To project over a wireless network, see "If projecting wirelessly using the optional wireless LAN module" on the back of this sheet. VGA computer cable USB cable (Windows only) • To give a presentation stored on a flash drive, digital camera, or other USB storage device, see the EasyMP Operation Guide on your projector CD. If connecting to a notebook... 1 T urn on the projector and adjust the image as described in sections 1 and 2 of this sheet. 2 Do one of the following: • Connect the square end of the USB cable to the projector's Type B (square) USB port. Connect the flat end of the USB cable to any available USB port on your notebook (Windows® only). Click Agree to install a one-time driver file. 2 Adjust the Image 1 To raise the image, press the foot release button for the front adjustable foot and lift the front. Release the button to lock the foot in position. • Connect one end of the VGA computer cable to the projector's blue Computer (Component Video) port. Connect the other end to your notebook's video-out port or monitor port. Switch your notebook to external display. *411777900* *411777900*