Epson PowerLite 1750 Quick setup - Page 1
Epson PowerLite 1750 Manual
View all Epson PowerLite 1750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PowerLite® 1750 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Camera, USB Device, or Epson Document Camera Connect a digital camera, USB flash drive, USB storage device, or Epson document camera to the projector's USB TypeA (flat) port. Connect the projector Choose from the following connections: Computer USB Port Connect a computer using the USB cable that came with the projector. Connect the square end of the USB cable to the projector's USB TypeB port. Connect the flat end of the cable to any USB port on your computer. Windows®: After turning on the projector, follow the on-screen instructions to install the Epson USB Display software (EMP_UDSE.EXE; only on first connection). Note: If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. If it still does not display, access the projector's Extended menu and select USB Display as the USB Type B setting. See the User's Guide on your projector CD for instructions. Macintosh®: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Computer Monitor Port Connect a computer using the VGA cable that came with the projector. Connect one end of the cable to the projector's Computer port, and the other end to your computer's monitor port. If you are using a notebook, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's Slideshow feature. See the User's Guide and EasyMP Slide Converter Operation Guide on your projector CD for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. Power button Video Device Connect up to 2 video devices and use the Source Search button on the projector or remote control to switch between them. RCA video cable (composite video) (optional) Component video to VGA cable (optional) Audio cable (optional) Power light The power light flashes green, then stays on. Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down.