Epson PowerLite 1751 Quick Setup - Page 1

PowerLite® 1751 Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Camera, USB device, or EPSON Document Camera DC-06 Connect a digital camera, USB flash drive, USB storage device, or EPSON document camera DC-06 to the projector's USB TypeA (flat) port. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer VGA cable USB cable HDMI cable USB port Connect the square end of a USB cable to the projector's USB TypeB (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® 2000 SP4 or later: After turning on the projector, follow the on-screen instructions to install the EPSON® USB Display software (EMP_UDSE.EXE; only on first connection). Note: If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. Mac OS X 10.5.1 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the EPSON® USB Display software (only on first connection). Monitor port Connect one end of a VGA cable to the projector's Computer port, and the other end to your computer's monitor port. If you are using a laptop, switch it to external display (see "Troubleshooting"). You can also connect an audio cable. HDMI port Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your computer. Note: To connect a Mac that includes only a Mini DisplayPort or Mini-DVI port for video output, you need to obtain an adapter that allows you to connect to the projector's HDMI port. Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. Video device Connect up to 3 video devices and use the Source Search button on the projector or remote control to switch between them. RCA video cable (composite video) Component video to VGA cable Audio cable HDMI cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's Slideshow feature to project images. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns orange. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. The projector beeps, the power light flashes green, and then stays on. Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. *412291200* *412291200*