Epson PowerLite 1776W Quick Setup - Page 2
Adjust the image, Using the remote control, Project wirelessly - wireless connection
View all Epson PowerLite 1776W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Project wirelessly Follow the steps here to connect the projector wirelessly over an 802.11n, 802.11g, or 802.11b wireless network. Your computer must have a wireless card or built-in wireless interface, and be running Windows 7, Windows Vista®, Windows XP Professional x64, Windows XP, or Windows 2000, or Mac OS X 10.4 to 10.7. 1 Turn off the projector and unplug the power cord. 2 To install the wireless LAN module, turn the projector over and remove the screw securing the wireless LAN module cover. 3 PowerLite 1776W: Press the Focus buttons to sharpen the image. PowerLite 1761W/1771W: Rotate the focus ring to sharpen the image. PowerLite 1776W PowerLite 1761W/1771W 4 Turn the zoom ring to reduce or enlarge the image. PowerLite 1776W PowerLite 1761W/1771W 5 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct it. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 3 Remove the wireless LAN module cover. 4 Insert the wireless LAN module into the port. 5 Replace the cover and secure it using the screw. Turn projector on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. 6 Plug in and turn on the projector. 7 To configure your projector for your wireless network, do one of the following: • If you're using the optional Quick Wireless Connection USB key, insert it into the projector's USB TypeA port, wait for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions to install the driver, then run your presentation. For details, see the online User's Guide. • If you're not using the key, continue with the following steps.