Epson PowerLite 1825 Start Here
Epson PowerLite 1825 Manual
 |
View all Epson PowerLite 1825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 1825 manual content summary:
- Epson PowerLite 1825 | Start Here - Page 1
PowerLite® 1825 Quick Setup Before using the projector, make sure you read the safety instructions in the User´s Guide on your projector CD. 1 Turn On Your Equipment 1 Connect the power cord to the back of the projector and plug the other end into an electrical outlet. 2 Turn the focus ring to - Epson PowerLite 1825 | Start Here - Page 2
or long distance charges may apply. Internet Support Visit Epson's support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Visit http://www
-
1 -
2
 |
 |
2
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
3
If your image looks like
,
,
,
or
, press the
Quick Setup
button on the projector and follow the on-screen instructions.
PowerLite
®
1825
Quick Setup
1
Turn On Your Equipment
1
Connect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Open the
A/V Mute
slide (lens cover). Make sure the slide is opened
completely.
3
Remove the battery cover on the remote control. Locate the two AAA
batteries that came with the projector and insert them. Then replace the
battery cover.
4
To turn the projector on, press the
Power
button on the projector or
the remote control. The projector beeps once, and the projector’s
Power
light flashes green and then stays on.
To shut down the projector:
1
.
Press the
Power
button twice.
2
.
When the orange light stops flashing and the projector beeps,
you can unplug the projector.
3
Choose a
Presentation Method
How do you want to get images to the projector?
•
To connect to a notebook, see “If connecting
to a notebook” below.
•
To project over a wireless network, see
“If projecting wirelessly” on the back of this sheet.
You must have installed the projector’s EasyMP
®
software and configured
your projector and computer before you can project wirelessly. See your
User’s Guide
for instructions.
•
To give a presentation stored on a CompactFlash
®
memory card,
flash drive, digital camera, or other USB storage device, see
Chapter 5 in your
User’s Guide
.
•
To connect to your notebook using the included USB cable,
see your
User’s Guide
.
If connecting to a notebook...
1
Turn on the projector and adjust the image as described in
sections 1 and 2 on this sheet.
2
Locate the computer cable that came with the projector.
Connect one end to the projector’s blue
Computer1
port.
Connect the other end to your notebook’s video-out port or
monitor port.
3
Press the
Source Search
button on the projector or the
Search
button on the remote control until your computer
image is displayed.
NOTE:
If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation).
2
Adjust the Image
1
To raise the image, press the foot release button for the front adjustable
foot and lift the front. Release the button to lock the foot in position.
Turn over
Computer cable
Zoom
Focus
Before using the projector, make sure you read the safety
instructions in the
User´s Guide
on your projector CD.
Power button
Power light
*411303300*
*411303300*