Epson PowerLite 1830 User's Guide - Page 50

Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wired Network Projection Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting Up Monitoring Using SNMP Wired Network Projection You can send images to your projector through a wired network. To do this, you connect the projector to your network, and then set up your projector and computer for network projection. After connecting and setting up the projector as described here, install the network software from the Epson Projector Software for Meeting & Presentation CD-ROM on your computer. Use the following software and documentation to set up, control, and monitor network projection: • EasyMP Network Projection software sets up your computer for network projection. See the Network and PC Free Operation Guide installed from your projector CD-ROM for instructions. • Easy Management® EasyMP Monitor software (Windows only) lets you monitor and control your projector through the network. See the EasyMP Monitor Operation Guide installed from your projector CD-ROM for instructions. Connecting to a Wired Network Selecting Wired Network Settings Parent topic: Using the Projector on a Network Connecting to a Wired Network To connect the projector to a wired local area network (LAN), use a 100BaseTX or 10BaseT network cable. To ensure proper data transmission, use a Category 5 shielded cable or better. 1. Connect one end of the network cable to your network router. 50