Epson PowerLite 1835 User's Guide - Page 37
Selecting the Connected USB Source, Disconnecting a USB Device or Camera From the Projector
View all Epson PowerLite 1835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB TypeA port shown below. 1 USB TypeA port Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly. 3. Connect the other end of the cable (if applicable) to your device. Parent topic: Connecting to External USB Devices Related topics Projecting a Slide Show Selecting the Connected USB Source You can switch the projector's display to the source you connected to a USB Type A port. 1. Make sure the connected USB source is turned on, if necessary. 2. Press the USB button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector. 1. Select Exit from any software running your slide show or presentation from the device. 2. Disconnect the USB device or camera from the projector. 37