Epson PowerLite 1880 Operation Guide - EasyMP Monitor - Page 44

Troubleshooting 44 Error Messages Remedy Connection failed due to keyword mismatch. When connecting to a projector for which a Projector Keyword has been set, the wrong Projector Keyword is entered. Check the Projector Keyword that is displayed on the LAN standby screen. s "Operating the Computer" p.11 Network adapter information could not be obtained. Check the following point. • Is a network adapter installed on the computer? • Is the driver for the network adapter used installed on the computer? • Is the network adapter enabled? After checking, restart the computer and connect again. If you still cannot connect, check the following. Check the network settings on the computer and the network settings on the projector. You can make network settings from the projector's Network menu. See your projector User's Guide for details. One or more connected projectors do not support resolutions greater than SXGA. Reduce the screen resolution and reconnect. There is an incompatible projector in the connection destination. Change the computer screen resolution to SXGA (1280x1024) or less. One or more projectors are not responding. Failed to simultaneously connect to one or more of the projectors that you attempted to connect to. Check the network settings on the computer and the network settings on the projector. You can make network settings from the projector's Network menu. See your projector User's Guide for details. To output audio from the projector, restart applications After restarting PowerPoint or Windows Media Player, audio is output from the projector. such as PowerPoint or Windows Media Player. You need to restart your computer to enable Audio To transfer audio to the projector and play back, select Yes and restart the computer. Output. Select "Yes" to restart now or select "No" to restart later. Cannot start this application while Quick Wireless Connection is running. Close Quick Wireless Connection and then start EasyMP Network Projection.