Epson PowerLite 1880 Start Here - Page 2
Adjust the image, Using the remote control, Project over a wirednetwork
View all Epson PowerLite 1880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4 Press the power button on the projector or remote control. The projector beeps, the power light flashes green, and then stays on. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down. 5 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press Enter. Select Language and press Enter. Select your language and press Enter. Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 Turn the zoom ring to reduce or enlarge the image. WT Turn projector on and off Choose which source to display Access projector menus Turn off projector display Navigate projector menus Get solutions to common problems For more information on using the remote control, see the online User's Guide. Project over a wired network Follow the steps here to configure your projector for your wired network using the projector's menu system. 1 Plug in and turn on the projector. 2 Press the Menu button on the remote control, select the Network menu, and press Enter. 4 Turn the focus ring to sharpen the image. 5 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Use the horizontal slider on the projector to correct it. Or place the projector directly in front of the center of the screen, facing the screen squarely. 3 Select Network Configuration and press Enter. 4 Select the Basic menu and press Enter. 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or buttons on the projector to correct it.