Epson PowerLite 400W Operation Guide - EMP Monitor v4.22 - Page 30
After completing the timer settings, click [OK]., When you click Add, the following window is
View all Epson PowerLite 400W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the control functions 29 f Procedures for new timer settings 2 When you click "Add", the following window is displayed and the new timer settings are applied. At "Operation", you can carry out the operations of turning the power on and off and switching the input sources, similarly for the control buttons on the main window. If you set the input source switching, the projector's power will turn on at the timer start time even if it is not on at the time. Because of this, it is not necessary to make two separate timer settings for turning the power on and switching the input source. 3 After completing the timer settings, click [OK]. The timer settings that have been made will be registered and they can be checked in the displayed timer list. TIP You can enable and disable all of the timer settings that have been registered. Select "Timer" - "Enable" or "Disable" from the "Tool" menu.