Epson PowerLite 430 Quick Setup - Page 2

4 The default language of the menu system is English. To select another language, press the Menu button on the remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. Using the remote control Make sure the batteries are installed as shown (two AA batteries). Turn projector on and off Access projector menus Choose which source to display Navigate projector menus 3 Press the Wide or Tele buttons on the projector to enlarge or reduce the image. Turn off projector display Get solutions to common problems 4 Turn the focus ring to sharpen the image. 5 If your image looks like or , press the or buttons on the projector to correct it. 6 If your image looks like or , you've placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely. Or press the or buttons on the projector to open the Keystone menu, and then press the Wide or Tele buttons to correct the horizontal keystone. For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the steps here to connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n wireless network. You must install the optional Epson wireless LAN module (part number V12H418P12). Your computer must have a wireless card or built-in wireless interface, and be running Windows 7, Windows Vista®, Windows XP Professional x64, Windows XP, or Windows 2000, or Mac OS X 10.3 to 10.7. 1 Turn off the projector and unplug the power cord. 2 Remove the screw securing the wireless LAN module stopper, then remove the stopper. 3 Insert the wireless LAN module into the port.