Epson PowerLite 4300 Operation Guide - EasyMP Monitor v4.50 - Page 25

Monitoring window layout 25 Lamp failure at power on (Lamp 1) High internal temperature error Air filter air flow sensor error Fan error Supply System Error (Ballast) Supply System Error (Ballast 2) Cinema filter error Cooling system error (Peltier element) Other error Lamp failure at power on (Lamp 2) Low air flow error Internal Error Sensor error Supply System Error (Ballast 1) Auto Iris Error Shutter error Cooling system error (pump) *1 When Temperature level display group view is set to On at Environment setup in the Tool menu, an icon indicating the internal temperature of the projector will be displayed on top of the projector icon. The default setting is Off. *2 Check the following items. - Check that the projector's power is turned on. - Check that the LAN cable is connected. - Check that Standby Mode is set to Communication On (or Network On) or Network Monitoring is set to On in the projector's configuration menu. *3 Check that the projector has been correctly connected to the network. *4 Using Environment setup in the Tool menu, you can set a duration of time after which the Replace Lamp notification will appear. (The notification will appear earlier if the lamp needs to be replaced before the selected time.) q • The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed. EasyMP Monitor displays will not be updated automatically even if the projector status returns to normal. Click "Refresh" in the main window to update the status. • Detectable error information differs with the projector you are using. Selecting display items You can select only the required items to be displayed in Detail list view. Procedure A Select "Option" from the View menu. The Option window will be displayed. B Select the check box of the item you want to display. C Click "OK".