Epson PowerLite 460 Quick Start
Epson PowerLite 460 Manual
 |
View all Epson PowerLite 460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 460 manual content summary:
- Epson PowerLite 460 | Quick Start - Page 1
PowerLite® 450W/460 Quick Setup Before using the projector, make sure you read the safety instructions in the User's Guide on your projector CD. Connect the projector Before you can connect to the projector, you need to loosen the screws and remove the cable cover. Network (LAN) Connect the - Epson PowerLite 460 | Quick Start - Page 2
. For more information on using the remote control, see your User's Guide. Turn on your equipment 1 Turn on your computer or video source. 2 Make sure the power cord is connected and plugged into an electrical outlet. Focus lever Project over the network Install EasyMP® Network Projection on each - Epson PowerLite 460 | Quick Start - Page 3
. (Do not enter the leading zeroes.) 2 Press Enter, or, if you set a web control password in the projector's Network menu, enter your user name and password, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and - Epson PowerLite 460 | Quick Start - Page 4
LCD dialog box is selected. 4 Click Arrangement or Arrange, then make sure Mirror Displays is selected. Where to get help Manuals For more information about using the projector, install the manuals from your projector CD. Telephone Support Services To use the Epson PrivateLine® Support service
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User’s Guide
on your projector CD.
Connect the projector
Before you can connect to the projector, you need to loosen the screws and
remove the cable cover.
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector’s
Computer1
or
Computer2
port, and
the other end to your computer’s
monitor port. If you are using a
laptop, switch it to external display. You can also connect an audio cable or
microphone.
Computer USB Port
Connect a computer using a USB cable.
Connect the square end of the USB cable to the projector’s
TypeB
(square) USB port. Connect the flat end of the cable to any USB port on your
computer. You can also connect an audio cable or microphone.
Follow the on-screen instructions to install the Epson USB Display software. If
you see warning messages, click
OK
or
Continue
. (Software is installed only
the first time you connect the computer.) Press the
USB
button on the remote
control if necessary.
Network (LAN)
Connect the projector to your network using an Ethernet
®
cable. See “Project
over the network” for more information.
Microphone
Connect a dynamic or condenser microphone to the
Mic
port, using a 3.5 mm
mini-jack cable.
Video Player
Connect up to 4 video devices and use the remote control to switch between
them.
RCA video cable
(composite video)
(optional)
S-Video
cable
(optional)
Component video
to VGA cable
(optional)
Audio cable
(optional)
Interactive Whiteboard or Document Camera
Connect an interactive whiteboard or document camera to the projector’s
TypeA
(flat) USB port.
For information on playing sound through the projector or connecting an
external monitor, see the
User’s Guide
on your projector CD.
PowerLite
®
450W/460
*411850400*
*411850400*