Epson PowerLite 460 Quick Start - Page 3
Network configuration, Using web remote - inputs
View all Epson PowerLite 460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Network configuration If you need to configure the projector for your network, you can use the projector's menu system. 1 Press the Menu button on the remote control, select the Network menu, then press Enter. Using web remote You can use a standard web browser to control the projector through the network. A "virtual remote control" on your computer screen lets you perform many of the same functions as you can with the physical remote control. 1 Open your web browser and enter the IP address of the projector you want to monitor in the browser window. If you're not sure what the address of the projector is, turn the projector on and select Net. Info.-Wired LAN or Net. Info.-Wireless LAN from the Network menu to display the IP address of the projector. (Do not enter the leading zeroes.) 2 Press Enter, or, if you set a web control password in the projector's Network menu, enter your user name and password, then press Enter. 2 Choose Network Configuration and press Enter. 3 Select the Wired LAN menu and press Enter. 4 Choose IP Settings and press Enter. You see a screen like the following: 5 Do one of the following: • If your network assigns addresses automatically, turn on the DHCP setting. • If your network does not assign addresses automatically, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. To enter numbers, use the buttons on the remote control to highlight the number you want to input, then press the Enter button. When you're finished entering an address in the network menu, highlight Finish, then press the Enter button. Press the Esc button to reutrn to the previous menu. 6 When you're done making all necessary changes, press the Esc button, select Complete and press the Enter button to save your settings. Then press Enter again to confirm. 7 Press the Menu button to exit the menu system. 3 From the Projector Control menu, select Web Remote. Use the on-screen buttons to operate the projector, as you would using the remote control. Select video signal Select computer signal Select equipment connected to the USB port Select wired or wireless network signal Turn off picture and sound Pause video Display closed captions