Epson PowerLite 52c Quick Start
Epson PowerLite 52c Manual
 |
View all Epson PowerLite 52c manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 52c manual content summary:
- Epson PowerLite 52c | Quick Start - Page 1
EPSON® PowerLite® 52c Quick Setup Connect the projector to your laptop For most setups, you'll need just these two cables: Power cord Computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer/Component Video port on the - Epson PowerLite 52c | Quick Start - Page 2
on top of the other. This lets you display on the projector screen as well as the LCD screen. If the Arrange option isn't available, you may need to select one of the Simulscan resolution settings. See your User's Guide for instructions. If You're Using a Macintosh with Mac OS X: 1. From the Apple
-
1 -
2
 |
 |
1
Connect the power cord to the back of
your projector and plug the other
end into an electrical outlet.
2
Remove the lens cover.
3
Press the red
Power
button. The power light
flashes green, and then stays on.
4
Turn on or restart your laptop. (Windows
®
only: If you
see this Add New Hardware screen, click
Cancel
.)
Turn over
T
urn on your equipment
C
onnect the projector
to your laptop
Power cord
Computer cable
Follow these instructions to connect the projector
to your laptop. To connect other devices, such as
a VCR or desktop PC, see your
User’s Guide
.
EPSON
®
PowerLite
®
52c
Quick Setup
Lens cover
Caution:
Before unplugging
the projector...
To shut the projector down properly:
1.
Press the red
Power
button twice.
Let the projector cool while the
power light flashes orange
(about 45 seconds).
2.
Once the light stops flashing and
stays on, it’s safe to unplug
the projector.
Never unplug the projector when
the power light is green or
flashing orange.
For most setups, you’ll need just these two cables:
Power light
1
Make sure your projector and laptop are turned off.
2
Connect one end of the computer cable to the
Computer/Component Video
port on the projector.
3
Connect the other end to your laptop’s video or
monitor port.
If you can’t connect the cable to your PowerBook,
®
you may need
to use an adapter. See your
User’s Guide
for instructions.