Epson PowerLite 52c Quick Start - Page 1

EPSON® PowerLite® 52c Quick Setup Connect the projector to your laptop For most setups, you'll need just these two cables: Power cord Computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer/Component Video port on the projector. Follow these instructions to connect the projector to your laptop. To connect other devices, such as a VCR or desktop PC, see your User's Guide. 3 Connect the other end to your laptop's video or monitor port. If you can't connect the cable to your PowerBook®, you may need to use an adapter. See your User's Guide for instructions. Turn on your equipment 1 Connect the power cord to the back of your projector and plug the other end into an electrical outlet. 2 Remove the lens cover. 3 Press the red Power button. The power light flashes green, and then stays on. 4 Turn on or restart your laptop. (Windows® only: If you see this Add New Hardware screen, click Cancel.) Lens cover Power light Caution: Before unplugging the projector... To shut the projector down properly: 1. Press the red Power button twice. Let the projector cool while the power light flashes orange (about 45 seconds). 2. Once the light stops flashing and stays on, it's safe to unplug the projector. Never unplug the projector when the power light is green or flashing orange. Turn over