Epson PowerLite 535W Quick Setup
Epson PowerLite 535W Manual
 |
View all Epson PowerLite 535W manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson PowerLite 535W manual content summary:
- Epson PowerLite 535W | Quick Setup - Page 1
PowerLite® 520/525W/530/535W Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer USB cable HDMI cable VGA - Epson PowerLite 535W | Quick Setup - Page 2
, remove the key, and connect it to a USB port on your computer. Follow your computer's on-screen instructions to install the driver, then reconnect the wireless LAN module to the projector's USB-A port. For details, see the online User's Guide. • If you're not using the key, continue with step 4. - Epson PowerLite 535W | Quick Setup - Page 3
again to 15 See "Install network software" for additional instructions. Project over a wired network Follow the steps here to configure your projector for your wired network using the projector's menu system. 1 Plug in and turn on the projector. 2 Press the Menu button on the remote control - Epson PowerLite 535W | Quick Setup - Page 4
without notice. Toll or long distance charges may apply. Internet support Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. Registration Register today to
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
Stereo mini cable
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
XP or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically,
open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
OS X 10.5.8 or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection).
Computer port
Connect one end of a VGA cable to the projector’s
Computer1
or
Computer2
ports, and the other end to your computer’s
monitor port.
If you are using a laptop, switch it to external display (see “Troubleshooting”).
You can also connect an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI
port and the other
end to an HDMI port on your computer.
Wired network
You can connect the projector to your network using an Ethernet cable. See
“Project over a wired network” for instructions.
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or remote control to switch between them.
Component video to VGA cable
HDMI cable
RCA video cable (composite video)
S-Video cable
RCA Audio cable
Camera, USB device, or Epson DC-06 document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06
document camera to the projector’s
USB-A
(flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
power light on the projector turns blue.
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status
light flashes blue and then stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
4
The default language of the menu system is English. To select another
language, press the
Menu
button on the projector or remote control.
Select
Extended
and press
. Select
Language
and press
.
Select your language and press
.
Press the
Menu
button to exit
the menu system.
PowerLite
®
520/525W/530/535W