Epson PowerLite 54c Quick Start - Page 1

HERE Connect the projector to your laptop For most setups, you'll need just these two cables: EPSON® PowerLite® 54c/74c Quick Setup TART S Power cord Computer cable 1 Make sure your projector and laptop are turned off. 2 Connect one end of the computer cable to the Computer1/Component Video1 or Computer2/Component Video2 port on the projector. Follow these instructions to connect the projector to your laptop. To connect other devices-such as a VCR, DVD, or desktop PC-and for complete instructions on using the projector, see your User's Guide. 3 Connect the other end to your laptop's video or monitor port. If you can't connect the cable to your Macintosh® PowerBook®, you may needto use an adapter. See your User's Guide for instructions. Turn on your equipment 1 Remove the lens cap. Lens cap 2 Connect the power cord to your projector and plug the other end into an electrical outlet. 3 Press the Power button. The projector beeps, and the Power light flashes green and then stays on. Power button 4 Turn on or restart your laptop. (Windows® only: If you see this Add New Hardware screen, click Cancel.) Caution: Before unplugging the projector... To shut the projector down properly: 1. Press the Power button twice. Let the projector cool while the Power light flashes orange (about 20 seconds). 2. Once the light stops flashing and stays on, it's safe to unplug the projector. Never unplug the projector when the Power light is green or flashing orange. Turn over