Epson PowerLite 5535U Quick Guide - Page 2

Turning the Projector On 1. Turn on your computer or image source. 2. Remove the lens cover. 3. Press the power button (projector) or On button (remote control). After the status light stays blue, the projector is ready. Note: If the Direct Power On function is enabled, you can turn the projector on without pressing the power button; just plug it in or flip the switch controlling the outlet to which the projector is connected. To turn on this feature, see the online User's Guide. 4. If your image does not appear, see "Switching Between Image Sources" or "Troubleshooting." Changing the Language of the Projector Menus The default language of the projector's menu system is English, but you can change it as necessary. 1. Press the Menu button to access the projector's menu system. 2. Select Extended > Language. 3. Select your language. 4. When you're done, press the Menu button to exit. Switching Between Image Sources Press the Search button or one of the source buttons (remote control), or the Source Search button (projector). Displaying a Test Pattern 1. Press the Test Pattern button (remote control) or the button (projector). 2. Press the Page up or down arrow button (remote control), or the Enter button (projector) to change the test pattern. 3. When you're done, press the Esc button to clear the test pattern. Changing Screen Type Set the Screen Type setting to the screen's aspect ratio. 1. Press the Menu button. 2. Select Extended > Display > Screen > Screen Type. 3. Select the screen's aspect ratio. Note: The displayed image should match the screen's size and shape. 4. When you're done, press the Menu button to exit. Note: After changing the screen type, you may need to change the aspect ratio of the projected image depending on the input signal. Press the Aspect button on the remote control to change the aspect ratio, if necessary.