Epson PowerLite 62c Installation Guide - ELPMBUNI Universal Mount Assembly - Page 15

ELPMBUNI Low-Profile Installation 1. If your installation requires the overall height of the mount to be less that the approximate 9" shown with the standard mount assembly, you can convert the height to only 2 ½" by simply removing the adjustment channel as shown. 2. Once the extension channel is removed, attach the upper ceiling plate to the ceiling. 3. Once attached install the bell housing assembly to the upper ceiling plate as shown (Figure 10, Figure 11, and Figure 12). Remove the M8 x 16mm Screws, flat Washers and Star Washers Remove the Middle Extension Completely Ceiling Plate Remove the M8 x 16mm Screws, Flat Washers, and Star Washers (Both Sides) Allen Wrench Remove the M8 x 16mm Screws, Flat Washers, and Star Washers (Both Sides) Page - 16 - Figure 10 Bell Housing Installation Manual