Epson PowerLite 735c Start Here Card

Epson PowerLite 735c Manual

Get Epson PowerLite 735c PDF manuals and user guides View all Epson PowerLite 735c manuals
Add to My Manuals
Save this manual to your list of manuals

Epson PowerLite 735c manual content summary:

  • Epson PowerLite 735c | Start Here Card - Page 1
    EPSON® PowerLite® 735c Quick Setup 2 Rotate the focus ring to sharpen the image. Rotate the zoom ring to reduce or enlarge the image. 1 Turn On the Projector 1 Connect the power cord to the back of the projector and plug the other end into a grounded outlet. 2 Remove the lens cover. 3 Locate the
  • Epson PowerLite 735c | Start Here Card - Page 2
    an 802.11b wireless network. NOTE: These instructions tell you how to connect a single computer to the projector using Ad Hoc mode. To connect multiple computers using Infrastructure mode, see your User's Guide. Install the software Before installing the projector's EasyMPTM software, make sure your
  • 1
  • 2
How do you want to get images to the projector?
To connect computer or video equipment,
see the instructions below and on the right.
To project over an 802.11b network, see
“If projecting wirelessly” on the back of this sheet.
To give a presentation stored on a memory card,
see Chapter 5 in your
User’s Guide
.
For details on any of these topics, see your
User’s Guide
.
If connecting a computer...
1
Make sure you’ve turned on the projector and adjusted the image
as described at left.
2
Locate the VGA cable that came with the projector. Connect one end
to the projector’s
Computer/Component Video
port.
Connect the other end to your laptop’s video-out port. (If you’re using
a desktop model, first disconnect the monitor cable from the computer,
then plug in the projector cable.)
EPSON
®
PowerLite
®
735c
Quick Setup
3
Choose a
Presentation Method
1
Turn On the Projector
1
Connect the power cord to
the back of the projector
and plug the other end into
a grounded outlet.
2
Remove the lens cover.
3
Locate the projector’s remote control.
Before using it for the first time, pull
out the plastic tape from the battery
tray (you don’t have to open the tray).
4
Aim the remote control at the
projector and press the red
Power
button. The
Power light flashes
green and the projector lamp comes
on in about 40 seconds.
Menu
A/V Mute
E-Zoom
Freeze
S-Video/Video
Color Mode
Page up
Page down
Power
ESC
Auto
Enter
Comp/EasyMP
3
Press the
Comp/EasyMP
button on the remote control until your
computer image is displayed.
4
If you’re using a laptop and you see a blank screen, you may need to
adjust its display settings:
Windows
®
:
Hold down the
Fn
button on the keyboard and press the
function key that lets you display on an external monitor. It may have
an icon such as
, or it may be labeled
CRT/LCD
. You may have to
use the Display utility in the Control Panel to enable both the LCD
screen and the external monitor port.
Macintosh
®
OS 9 or earlier:
From the
Apple
menu, select
Control
Panels
, then click
Monitors
or
Monitors and Sound
. Click the
Arrange
icon, then drag one monitor icon on top of the other;
this lets you display on both the projection screen and the LCD
screen. If this option isn’t available, click the
Monitor
icon and
select a
Simulscan
resolution.
Macintosh OS X:
From the
Apple
menu, select
System Preferences
,
then click
Displays
. Select the
VGA Display
or
Color LCD
dialog box,
click the
Arrange
(or
Arrangement
) tab, and make sure
Mirror
Displays
is checked.
5
If you see an image but it’s not displayed correctly, press the
Auto
button on the remote control to automatically readjust it.
If connecting video equipment...
1
Make sure you’ve turned on the projector and adjusted the image
as described on the far-left.
2
Locate the RCA-style video cable that came with the projector.
Connect one end to the projector’s
Video
port.
3
Connect the other end to the video-output connector on your
video equipment.
4
Press the
S-Video/Video
button on the remote control until your
video image is displayed.
S-Video/Video
Color Mode
Page up
Page down
Power
Comp/EasyMP
S-Video/Video
Color Mode
Page up
Page down
Power
Comp/EasyMP
2
Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
3
If your image looks like
or
, you’ve placed the projector off
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
4
If your image looks like
or
, press the
or
side of the
Keystone
button on the projector.
Power
button
Focus ring
Zoom ring
Comp/EasyMP
button
S-Video/Video
button
1
To raise the image, press the blue foot release buttons on each side
of the projector and lift the front. Release the buttons to lock the
feet in position.
You can fine-tune the height by rotating the feet.
2
Adjust the Image
continued
continued
Keystone
button
Click here
Drag one monitor
icon onto the other