Epson PowerLite 74c User Manual - Page 23
If more than one device is connected to the projector, select, After you turn on your projector
View all Epson PowerLite 74c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2. Connect the yellow RCA plug on the two-connector end of the cable to the projector's yellow Video jack as shown below. 3. Connect the other yellow plug to the video-out jack on your video source. 4. To play sound through the projector, connect the black audio plug on the RCA A/V cable to the projector's Audio2 jack. 5. Connect the red and white plugs on the other end of the cable to the corresponding audio output jacks on your video source. 6. After you turn on your projector, be sure to: ■ If more than one device is connected to the projector, select Video when you want to project this source. See page 30. ■ Open the Audio menu and make sure Audio 2 is selected for the Audio Input setting. See page 51. note The Audio menu also lets you adjust the volume. Setting Up the Projector 23