Epson PowerLite 77c Start Here - Page 2

2 Connect your video source Connect the projector to a computer or video source using any of the available connections shown below. • Check the connectors on your video equipment. If more than one connection is available, choose the one that provides the best quality. The projector connectors from highest to lowest quality are Computer (Component Video), S-Video, and Video. • A computer cable is included. You can purchase optional video and audio cables through Epson® or an electronics store. • You can connect up to 3 video devices and use the remote control to switch between them. S-Video cable (optional) RCA video cable (composite video) (optional) Component video to VGA cable (optional) Computer cable (included) Audio ports EPSON NOTE You can also connect an external monitor (to watch the display on your computer monitor while watching the projection screen), and a USB cable to use the remote control to change presentation slides. See the User's Guide on your CD-ROM for instructions. 3 Set up the remote control 1 Remove the battery cover. 2 Insert the batteries. 3 Replace the battery cover. The remote control is ready for use.